Vornado Air, LLC
415 East 13th Street, Andover, Kansas 67002
CL3-0092 RD
CL7-0092 RD, V00
Assembled, designed and supported in Andover, Kansas.
Montaje, diseño y soporte en Andover, Kansas.
Questions or comments?
¿
Prequntas o comentarios?
800.234.0604
VORnaDO® VORTEx acTiOn
TRuST
It is said that trust isn’t given, but earned. For decades Vornado
has been earning the trust of our customers by offering them only
the best. Vornado provides the highest level of performance,
coupled with the highest level of support available. Complete
satisfaction with no exceptions – this is Vornado’s promise to you.
If you are not satisfied for any reason, please contact us.
Knowledgeable representatives are available at 1-800-234-0604
from 8:00 AM to 5:00 PM CST. A wealth of additional support is
and the entire staff at our Andover, Kansas headquarters – thank
you for selecting Vornado.
Ordinary Heater
Without Adequate
Heat Circulation
Vornado whole
Room Heater
With Signature
Vortex Heat
Circulation
82º
82º
82º
72º
72º
72º
Sincerely,
Bill phillips
CEO, Vornado Air
LEaDERS in aiRfLOw TEcHnOLOgy™
62º
DVTH
OFF
OFF
OFF
Zippi™
fLippi™
wHOLE ROOM
aiR ciRcuLaTORS
ON
ON
Ordinary heaters provide only localized heat. Heat immediately rises
to the ceiling, resulting in cold and hot spots in the room. Vornado’s
unique Vortex Action delivers continuous, uniform heat surrounding
everyone in the room in a warm, comfortable temperature.
wHOLE ROOM
HuMiDifiERS
TOwER
ciRcuLaTORS
wHOLE ROOM
HEaTERS
English
3
iMpORTanT inSTRucTiOnS
REaD aLL inSTRucTiOnS BEfORE uSing THiS HEaTER.
Please visually inspect all internal and external components before connecting to electric current. If any damage
is found, DO NOT USE THIS UNIT and contact Vornado Air LLC at 1-800-234-0604.
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire,
electric shock, and injury to persons, including the following:
Read all instructions before using this heater.
To prevent a possible fire, do not block air intakes or exhaust in any manner. Do
not use on soft surfaces, like a bed, where openings may become blocked.
This heater is hot when in use. To avoid burns, do not let bare skin touch hot
surfaces. Use handles when moving this heater. Keep combustible materials, such
as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m)
from the front of the heater and keep them away from the sides and rear.
A heater has hot and arcing or sparking parts inside. Do not use it in areas where
gasoline, paint, or flammable liquids are used or stored.
Use this heater only as described in this manual. Any other use not recommended
by the manufacturer may cause fire, electric shock, or injury to persons.
Extreme caution is necessary when any heater is used by or near children or
invalids and whenever the heater is left operating and unattended.
Always plug heaters directly into a wall outlet/receptacle. Never use with an
extension cord or relocatable power tap (outlet/power strip). Operate this heater
only in its upright position.
Always unplug heater when not in use.
Do not operate any heater with a damaged cord or plug or after the heater
malfunctions, has been dropped or damaged in any manner. Discard heater, or
return to authorized service facility for examination and/or repair.
Do not operate this heater on an elevated surface such as a shelf or desktop. Use
only while placed on the floor.
Do not use outdoors.
This heater is equipped with a thermal safety shut-off system, designed to turn off
the heater when an internal overheating condition is detected (see How To Use
“RESETTING YOUR VORNADO HEATER,” to determine how to check and reset
the heater).
This heater is not intended for use in bathrooms, laundry areas and similar indoor
locations. Never locate heater where it may fall into a bathtub or other
water container.
This appliance has a polarized plug (one blade is wider than the other). To reduce
the risk of electric shock, this plug is intended to fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or
similar coverings. Do not route cord under furniture or appliances. Arrange cord
away from traffic area and where it will not be tripped over.
To disconnect heater, turn controls to off, then remove plug from outlet.
Do not operate this product with any electronic speed-control device on the
same circuit.
Do not insert or allow foreign objects to enter any ventilation or exhaust opening
as this may cause an electric shock or fire, or damage the heater.
Do not use heater to dry human or animal hair/fur or articles of clothing.
4
English
SaVE THESE inSTRucTiOnS
HOw TO uSE
caRE & MainTEnancE
Using your Vornado Heater is easy. Just follow these simple steps.
Your heater has no user serviceable parts. Do not disassemble the
unit – it will void your warranty. If service is required, return your
heater to Vornado (see Warranty section).
1. Position your heater so the vortex beam of warm air is directed
across the room unobstructed. Position it in a location that
is representative of the room temperature. The unique side-
angled air inlets allow the heater to be placed closer to walls
than possible with most ordinary heaters (but do not place close
to combustibles). Avoid areas of temperature extremes such
as cold drafts and heat registers. Please refer to IMPORTANT
INSTRUCTIONS at the beginning of this owner’s guide.
The motor is permanently lubricated and requires no oiling.
Because your heater moves a substantial amount of air, it will
require regular cleaning. Be sure to unplug the unit prior to any
cleaning activity.
Use a vacuum cleaner with the brush attachment to clean any
accumulated dust on the front grill and the side air inlets. During
the off-season or extended periods of non-use, store your heater.
Unplug the unit and bundle the cord. Save the plastic bag the
heater was shipped in so you can cover the unit and minimize
settling dust.
2. Plug the power cord into a standard wall outlet.
3. Press the POWER button.
4. Then press the MODE button to select LO (low heat), HI (high
heat), or FA (fan only).
5.
Press the WARMER button to raise the set temperature or
COOLER to lower the set temperature. The unit will display the set
temperature when the SET TEMP light is lit.
6. Your DVTH will generate only the heat required to obtain and
maintain the set temperature.
English
5
DVTH OpERaTing cOnTROLS
RESETTing yOuR VORnaDO HEaTER
Your Vornado Heater has a multi-level safety shut-off system designed
to prevent overheating. Overheating may occur when the inlets or
outlet are blocked, a foreign object prevents the blade from turning,
or the appliance tips over. If this happens, the safety shut-off system
will cut power to the heat element and you will need to manually reset
the heater.
1
pOwER On/Off
2
cOOLER
Lower the desired room
temperature.
3
4
waRMER
Raise the desired room temperature.
Set the POWER switch to OFF and unplug the unit.
Remove any obstructions.
1.
2.
3.
4.
5.
MODE
Wait 5–10 minutes, allowing the unit to cool down.
Plug in the unit and place in desired position.
HIGH HEAT 1500 watts, LOW HEAT
750 watts, or FAN ONLY.
Set the POWER switch to ON. Your Vornado Heater should now
function normally.
5
LcD DiSpLay
Indicates mode, room temperature
or set temperature.
If the safety shut-off system repeatedly shuts off your heater or if it
will not reset after following the above procedure, DO NOT
ATTEMPT TO DISASSEMBLE THE UNIT. Call Vornado Consumer
Services Department toll-free at 1-800-234-0604.
6
MODE light
Indicates the display is showing the current mode. FA is fan only. LO is
low heat. Low heat is helpful for limiting the power draw on the circuit
the unit is using. HI is high heat, for maximum heat potential. The unit
will throttle back and draw only the power it needs to maintain the
set temperature.
7
8
ROOM TEMp light
Indicates the display is showing the current room temperature. The
temperature is approximate and may vary based on room size and
ceiling height.
SET TEMp light
Indicates the display is showing the current desired room temperature.
Note the set temperature can be changed just by pressing the
WARMER or COOLER button; you do not need to press the MODE
button first.
6
English
OpERaTing TipS
aDVancED SafETy fEaTuRES
TIGHT GRILL SPIRALS
Resists curious fingers.
If unit has been unplugged, start the unit following the start-up
instruction (see How To Use). If unit has not been unplugged, just press
the POWER button and the unit will continue from the last used setting
before it was turned off.
To use your DVTH as a fan set the MODE to FA (fan only).
Your Vornado DVTH, like other 1,500-Watt electric heaters, draws up to
12.5 Amps of electric current. If using your DVTH on HI (high heat)
mode causes your home circuit breaker to fuse or trip, we offer the
following suggestions:
COOL TOUCH CASE
Safe to touch, even on high heat setting.
Try turning off other electrical appliances that run on the same circuit
as your heater.
AUTOMATIC SAFETY SHUT OFF SYSTEM
If airflow becomes blocked, power to the heating
element is shut off to prevent overheating.
Run your heater on the LO (low heat) mode.
Have your electrician add some additional circuits to your home
electrical system.
When the room temperature is higher than the set temperature it is
normal and correct to have little to no heat coming out of the DVTH.
When the unit is first turned on there is a slight delay before heat will
start to be produced.
TIP-OVER PROTECTION
If tipped over, power to the heating element and fan
motor is reduced to prevent overheating.
ALWAYS USE COMMON SENSE WHEN USING THIS AND/OR
ANY ELECTRICAL APPLIANCE
IDEAL 120°F EXIT AIR TEMPERATURE
Warm enough to heat an entire room.
English
7
VORnaDO aiR LLc
5-yEaR LiMiTED waRRanTy
Vornado Air LLC (“Vornado”) warrants to the original consumer or
purchaser that this TVH500 heater (“Product”) is free from defects in
material or workmanship for a period of five (5) years from the date of
purchase. If any such defect is discovered within the warranty period,
Vornado, at its discretion, will repair or replace the Product at no cost if the
Product is returned to Vornado postage-paid. Repairs not covered by the
warranty or outside the warranty period will require a fee to cover the cost of
materials, handling and shipping.
Staple or attach your original sales receipt to this Owner’s Guide. Please also
write your Product’s serial number below (located on product specs decal).
Serial No.______________________________________
After receiving the RA form, ship your Product to:
Vornado Air LLC
Attn: Warranty & Repair
415 E. 13th Street
Andover, KS 67002
This warranty does not apply to defects resulting from abuse of the
Product, modification, alteration, repair or service of the Product by
anyone other than Vornado, mishandling, improper maintenance,
commercial use of the Product, damages which occur in shipment or are
attributed to acts of God.
To assure proper handling, packages must be clearly marked with the RA
number. Packages not clearly marked with the RA number may be refused at the
receiving dock.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS
THE EXCLUSIVE REMEDY OF THE CONSUMER. VORNADO SHALL
NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY
ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS
LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.
Please allow 1-2 weeks for repair and return of your Product after the
Product is received.
© 2011 Vornado Air LLC Andover, KS 67002
Specifications subject to change without notice. Vornado® is a trademark owned
by Vornado Air LLC. Designed, engineered and assembled in the U.S.A.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, or allow limitations on how long an implied
warranty lasts, so the above limitations or exclusions may not apply to
you. This warranty gives you specific legal rights, and you may have
other rights that vary from state to state.
VORNADO CONSUMER SERVICES
For warranty or repair service, call 1-800-234-0604 or email
[email protected] to obtain a Return Authorization
(“RA”) form. Please have or include your Product’s model number and
serial number, as well as your name, address, city, state, zip code and
phone number when contacting Vornado for warranty service. You may
be required to provide the original sales receipt. For your records:
800.234.0604
8
English
Español
9
|